Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150

Product Details
Customization: Available
Standard or Nonstandard: Standard
Sealing Gland: Sealed On Both Sides
Still deciding? Get samples of US$ 20000/Piece
Request Sample

360° Virtual Tour

Diamond Member Since 2012

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
25
Year of Establishment
2007-06-18
  • Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150
  • Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150
  • Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150
  • Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150
  • Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150
  • Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150
Find Similar Products

Basic Info.

Model NO.
131.50.3150
Rolling-Element Number
Triple Row
Roller Type
Four Point Contact Ball
Material
50mn, 42CrMo
Type
External Gear
Brand
Lyhy
Custom Design
Available
Transport Package
Wooden Box
Specification
ISO2001: 9008
Trademark
LYHY
Origin
China
HS Code
848210900
Production Capacity
600PCS Per Year

Product Description

Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150
LYHY bearings is a professional manufacture of ball bearing, roller bearing, slewing bearing in china
Detailed specifications for the model: 131.50.3150

 
1 Type triple roller slewing bearing,
ring bearing, slewing gear
2 Bore diameter 2868mm
3 Outside diameter 3476mm
4 Height  270mm
5 Material 42CrMo, 50Mn
6 Precision P0. P6. P5.
7 Cage/retainer Nylon or aluminum
8 Gear type External gear
9 N.W. 5409KGS

Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150
Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150

Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150


Introduction of LYHY triple row roller slewing bearing

LYHY is a professional manufacturer in slewing ring bearings since 1993. We can also design and make other standard and non-standard ball bearings, roller bearings and precision bearings as per customer's different technical requirements.



Slewing bearing is also called slewing ring, slewing ring bearing, turntable bearing, and rotary bearing.
Three row roller slewing ring bearing has three seat-rings, which separate the upper, lower and radial raceway, via which the load of each row of the rollers may be specified. Thus it can carry different load simultaneously and its load capacity is the largest one of the four types


Structure:
Triple row roller slewing bearing has three different types:
Triple row roller slewing bearing with no gear
Triple row roller slewing bearing with external gear
Triple row roller slewing bearing with internal gear

Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150Why choose LYHY slewing bearings
A pioneer in slewing bearing field, rich experience, can do design, produce, mounting guide
Small order accepted
ISO certified company
Variorum models
7*24hours hotline to help you with your cranes
Strict quality control system to ensure quality for slewing bearing



LYHY Slewing Bearing Types
LYHY slewing bearings can be divided into the following types as per  their structures:
single row four point contact ball slewing bearing,
single row cross roller slewing bearing,
double row different ball diameter slewing bearing,
three row cylindrical roller slewing bearing and roller/ball combination slewing bearing.
And all these types of slewing bearings can be further divided into bearings without gears, bearings with external gears and bearings with internal gears.

Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150
Detailed description of these types slewing bearings

Single row four point contact ball slewing bearings
     This kind of slewing bearings can support high dynamic loads, transmitting axial and radial forces simultaneously as well as the resulting tilting moments. Applications of this kind of bearings are hoisting, mechanical handling and general mechanical engineering etc.
Single row cross roller slewing bearings
     This kind of bearings can support combinations of large radial force, medium axial force and tilting moment with small or zero clearance. Main applications of this kind of bearings are hoisting and mechanical handling and general mechanical engineering etc.
Double row different ball diameter slewing bearings
     This kind of bearings can support high static loads with simple structures. They are mainly used in situations with variation load position and direction and continuously rotating. Main applications of this kind of bearings are deck hoisting, mining and material handling etc.
Triple row cylindrical roller slewing bearings
     This kind of bearings has high load carrying capacity. Under same loads, this kind of bearings has much smaller diameters which can make the installation much compact, as different kinds of loads are supported by different races and rollers. Main applications of this kind of bearings are hoisting, mechanical handling, mining and materials handling, offshore technology and general mechanical engineering etc.
Roller/ball combination slewing bearings
     This kind of bearings can support high axial load and low tilting moments. Usually they are large diameter slewing bearings. Applications of this kind of bearings are mining and materials handling etc.


About LYHY bearings
1.introduction:we are a manufacturer of slewing bearing since 1993, our factory occupies a area of 30000square meters with 4 workshop and 1 office building. 
2. Featured products: slewing bearing and slewing drive
3. Capital: Current is 1 million RMB, but we are increasing the capital to 10 million RMB
4. Workers: 40
5. Certificate: ISO9001:2008, 3.1 certificate, CCS certificate, Science and Technology Progress Award
6. Annual Exportation: 8million USD
7. Exported countries: (39)
Asia: India, Pakistan, Iran, Signore, Georgia, Malaysia, Vietnam, Thailand, Philippines, Israel, Korea, UAE, Sri Lanka, Saudi Arabia,
Europe: Turkey, Russia, Spain, Czech Republic, Italy, Poland, Slovakia, Bosnia and Herzegovina, Austria, France, Germany, Switzerland, Finland, Ukraine, UK
America: USA, Canada, Mexico, Brazil, Puerto Rico, Peru, Chile
Africa: South Africa, Egypt
Oceania: Australia

Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150

Production Process of LYHY slewing bearings
Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150

Quality Control Process of LYHY slewing bearings
Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150
LYHY Slewing Bearing Packing 
Bearing surface is covered with the anti-rust oil first; and then wrapped with the plastic film;
And then packed with kraft paper and professional belts;
At last, with wooden box totally at the outer packing to invoid the rust or the moist;

We can depend on the customers  demand to be packed;
Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150

Features
Triple row roller slewing ring bearings have following features:
Larger axial and radial dimension, compact structure

Application
Triple row roller slewing rings are widely used in heavy-duty machines which require large working radius, such as bucket-wheel excavators, wheeled cranes, ship cranes, ladle turret, auto cranes etc.
Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150

Transportation:
All LYHY slewing ring bearings can be usually delivered timely, usual production time is 15-50 days based on different slew bearings diameters, sometimes slew rings will be in stock.
Slewing bearings can be offered different delivery terms, such as EXW, FOB, CIF, DDU and so on.
Also, slewing rings can be transported by different transport ways, by express (such as DHL, TNT, UPS, FEDEX and so on), by air, by sea, by truck, by railway and so on.


Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150


FAQ:

Q: Are LYHY BEARINGS trading company or manufacturer?
A: LYHY BEARINGS is a professional manufacturer for slewing bearings, thin section bearings, ball bearings and rolling bearings


Q: How do LYHY BEARINGS control quality of their bearing?
A: LYHY BEARINGS has established strict quality control systems, all the products and services has passed ISO9001-2008 Quality Certificate and third party such as CCS, LR,ABS,BV


Q: What is the MOQ?
A: MOQ is 1pc, pls message us for detailed information.

Q: How about the package for LYHY bearings?
A: Standard Industrial packing in general condition (Plastic tube+ professional plastic belts+ plywood case). Accept design package when OEM.

Q: How long is the production time?
A: It takes about 7-40 days, depends on the model and quantity.

Q: How about the shipping?
A: We can arrange the shipment or you may have your own forwarder.

Q: Is sample available?
A: Yes, sample order is acceptable.

Q: Can we use our own LOGO or design on bearings?
A: Yes. OEM is acceptable for LYHY BEARINGS. We can design as per your requirements and use your own LOGO and package design.



INSTALLATION OF LYHY SLEWING BEARINGS
Triple Row Slewing Bearing Roller Bearing for Ship Crane 131.50.3150
Preparation:
Make sure that the model is correct and slewing bearing isn't damaged during transportation.
2.  Check the appearance and rotational state of the bearing, such as rotational precision clearance, rotating flexibility, seals position, lubrication grease etc.
3.  The installation datum plane and bracket installing plane should be clean, grease, burr, paint and other foreign body should be wiped off.

Installation:

1. The screws in the installing plane should be fit with the mounting holes in the slewing bearing
2.  The slewing bearing has a soft zone marked with an "s" on the upper surface, when installing the bearing, it is important to ensure that this area is placed in a non-load or infrequent load zone.
3.  When the bearing is placed on the supporting frame work it is important to check the interface between these two surfaces. This check should be carried out with the insertion of feel gauges between the two surfaces. If a gap should exist then it is recommended to plane/resurface the effective area so as to remove the gap.
4.  Install slewing bearing with high strength screws, and choose appropriate strength bolts. All bolts are required to be tightened evenly. The sequence of this tightening process is shown in Pic. Welding of bearing is not allowed, in the event of welding any adjacent parts, heat transfer shall be avoided so as to cause the bearing to become deformed or change the hardness.
5.  After installation, the bearing should be rotated to check for smooth operation and any emission of unusual noise. If either of the aforementioned are noted, then the bearing should be adjusted to eliminate them. The teeth of the largest run-out are coated with green paint.



Without toothed
130.25.500, 130.25.560, 130.25.630, 130.25.710, 130.25.800, 130.32.900, 130.32.1000, 130.32.1120, 130.40.1250, 130.40.1400, 130.40.1600, 130.40.1800, 130.45.2000, 130.45.2240, 130.45.2500, 130.45.2800, 130.50.3150, 130.50.3550, 130.50.4000, 130.50.4500
External toothed
131.25.500, 132.25.500, 131.25.560, 132.25.560, 131.25.630, 132.25.630, 131.25.710, 132.25.710, 131.32.800, 132.32.800, 131.32.900, 132.32.900131.32.1000, 131.32.1120, 132.32.1120, 131.40.1250, 132.40.1250, 131.40.1400, 32.40.1400, 131.40.1600, 132.40.1600, 131.40.1800, 132.40.1800, 131.45.2000, 131.45.2000, 132.45.2000, 131.45.2240, 131.45.2500, 132.45.2500, 132.45.2500, 131.45.2800132.45.2800, 132.45.2800, 132.45.2800, 131.50.3150, 132.50.3150131.30.3150, 131.50.3150, 132.50.3150132.50.3150, 131.50.3550, 132.50.3550, 132.50.3550, 132.50.3550, 131.50.4000132.50.4000, 131.50.4000, 132.50.4000, 131.50.4500, 132.50.4500131.50.4500, 132.50.4500

Internal toothed
133.25.500, 134.25.500, 133.25.560, 134.25.560, 133.25.630, 134.25.630, 133.25.710, 134.25.710, 133.32.800, 134.32.800, 133.32.900
134.32.900, 133.32.1000, 133.32.1120, 134.32.1120, 133.40.1250, 134.40.1250, 133.40.1400, 134.40.1400, 133.40.1600, 134.40.1600, 133.40.1800, 134.40.1800, 133.45.2000, 134.45.2000, 133.45.2240
134.45.2240, 133.45.2500, 134.45.2500, 133.45.2800, 134.45.2800, 133.50.3150, 134.50.3150, 133.50.3150, 133.50.3550, 134.50.3550, 133.50.4000, 134.50.4000, 133.50.4500, 134.50.4500
 Model over all Dimension Mounting Dimension Structure Dimension Gear Parameter Load(104N) Mass
None gear    External Gear Internal Gear D d H D1 D2 N φ D3 d1 H1 h n3 φ3 m Da Z da Z b X
mm mm mm mm mm mm Coa Cor kg
130.25.500 131.25.500 133.25.500 634 366 148 598 402 24 18 537 526 32 10 4×2 M10×1 5 665 130 335 68 80 0.5 275 35.5 224
132.25.500 134.25.500 634 366 148 598 402 24 18 474 463 32 10 4×2 M10×1 6 666 108 336 57 80 0.5 275 35.5 224
130.25.560 131.25.560 133.25.560 694 426 148 658 462 24 18 597 586 32 10 4×2 M10×1 5 725 142 395 80 80 0.5 308 39.9 240
132.25.560 134.25.560 694 426 148 658 462 24 18 534 523 32 10 4×2 M10×1 6 726 118 396 67 80 0.5 308 39.9 240
130.25.630 131.25.630 133.25.630 764 496 148 728 532 28 18 667 656 32 10 4×2 M10×1 6 810 132 456 77 80 0.5 345 45.1 270
132.25.630 134.25.630 764 496 148 728 532 28 18 [604] [593] 32 10 4×2 M10×1 8 808 98 456 58 60 0.5 345 45.1 270
130.25.710 131.25.710 133.25.710 844 576 148 808 612 28 18 747 736 32 10 4×2 M10×1 6 888 145 534 90 80 0.5 388 51.7 300
132.25.710 134.25.710 844 576 148 808 612 28 18 [684] [673] 32 10 4×2 M10×1 8 888 108 536 68 80 0.5 388 51.7 300
130.32.800 131.32.800 133.32.800 964 636 182 920 680 36 22 841 830 40 10 4×2 M10×1 8 1008 123 592 75 120 0.5 549 71.2 500
132.32.800 134.32.800 964 636 182 920 680 36 22 [770] 759 40 10 4×2 M10×1 10 1010 98 590 60 120 0.5 549 71.2 500
130.32.900 131.32.900 133.32.900 1064 736 182 1020 780 36 22 941 930 40 10 4×2 M10×1 8 1104 135 688 87 120 0.5 619 80.8 600
132.32.900 134.32.900 1064 736 182 1020 780 36 22 [870] [859] 40 10 4×2 M10×1 10 1110 108 690 10 120 0.5 619 80.8 600
130.32.1000 131.32.1000 133.32.1000 1164 836 182 1120 880 40 22 1041 1030 40 10 5×2 M10×1 10 1220 119 780 79 120 0.5 689 90.3 680
132.32.1000 134.32.1000 1164 836 182 1120 880 40 22 [970] [959] 40 10 5×2 M10×1 12 1224 99 780 66 120 0.5 689 90.3 680
130.32.1120 131.32.1120 133.32.1120 1284 956 182 1240 1000 40 22 1161 1150 40 10 5×2 M10×1 10 1340 131 900 91 120 0.5 768 102 820
132.32.1120 134.32.1120 1284 956 182 1240 1000 40 22 [1090] [1079] 40 10 5×2 M10×1 12 1344 109 900 76 120 0.5 768 102 820
130.40.1250 131.40.1250 133.40.1250 1445 1055 220 1393 1107 45 26 1300 1290 50 10 5×2 M10×1 12 1512 123 984 83 150 0.5 1110 146 1200
132.40.1250 134.40.1250 1445 1055 220 1393 1107 45 26 [1210] [1200] 50 10 5×2 M10×1 14 1512 105 980 71 150 0.5 1110 146 1200
130.40.1400 131.40.1400 133.40.1400 1595 1205 220 1393 1107 45 26 1450 1440 50 10 5×2 M10×1 12 1668 136 1140 96 150 0.5 1240 165 1300
132.40.1400 134.40.1400 1595 1205 220 1393 1107 45 26 [1360] [1350] 50 10 5×2 M10×1 14 1666 116 1134 80 150 0.5 1240 165 1300
130.40.1600 131.40.1600 133.40.1600 1795 1405 220 1743 1457 48 26 1650 1640 50 10 6×2 M10×1 14 1876 131 1330 96 150 0.5 1420 190 1520
132.40.1600 134.40.1600 1795 1405 220 1743 1457 48 26 [1560] [1550] 50 10 6×2 M10×1 16 1872 114 1328 84 150 0.5 1420 190 1520
130.40.1800 131.40.1800 133.40.1800 1995 1605 220 1943 1657 48 26 1850 1840 50 10 6×2 M10×1 14 2072 145 1520 110 150 0.5 1590 215 1750
132.40.1800 134.40.1800 1995 1605 220 1943 1657 48 26 [1760] [1750] 50 10 6×2 M10×1 16 2080 127 1520 96 150 0.5 1590 215 1750
130.45.2000 131.45.2000.03   2195 1816 150 2127 1885 60 33   2041 33 13 3×5 ZG1/4in 16 2267 138 - - 105 0.9 1690 66.3 1120
131.45.2000.04   2221 1779 231 2155 1845 60 33 2059 2055 54 12 6×3 M10×1 16 2304 141 1696 107 160 0.5 2050 239 2230
131.45.2000 133.45.2000 2221 1779 231 2155 1845 60 33 2055 2033 54 12 6×2 M10×1 16 2304 141 1696 107 160 0.5 2050 239 2400
132.45.2000 134.45.2000 2221 1779 231 2155 1845 60 33 [1967] [1945] 54 12 6×2 M10×1 18 2304 125 1692 95 160 0.5 2050 239 2400
130.45.2240 131.45.2240 133.45.2240 2461 2019 231 2395 2085 60 33 2295 2273 54 12 6×2 M10×1 16 2560 157 1920 121 160 0.5 2310 268 2700
132.45.2240 134.45.2240 2461 2019 231 2395 2085 60 33 [2207] [2185] 54 12 6×2 M10×1 18 2556 139 1926 108 160 0.5 2310 268 2700
131.45.2500.04   2721 2279 231 2655 2345 72 33 2555 2561 54 12 8×3 M10×1 18 2826 154 - - 160 0.5 2580 302 2834
130.45.2500 131.45.2500 133.45.2500 2721 2279 231 2655 2345 72 33 2555 2533 54 12 8×2 M10×1 18 2826 154 2178 122 160 0.5 2580 302 3000
132.45.2500 134.45.2500 2721 2279 231 2655 2345 72 33 [2467] [2445] 54 12 8×2 M10×1 20 2820 138 2180 110 160 0.5 2580 302 3000
130.45.2800 131.45.2800 133.45.2800 3021 2579 231 2955 2645 72 33 2855 2833 54 12 8×2 M10×1 18 3114 170 2184 139 160 0.5 2880 339 3400
132.45.2800 134.45.2800 3021 2579 231 2955 2645 72 33 [2767] [2745] 54 12 8×2 M10×1 20 3120 153 2480 125 160 0.53 2880 339 3400
132.45.2800.03   3021 2579 231 2955 2645 72 33 2855 2833 54 12 8×3 M10×1 20 3120 153     160 0.5 2896 323 3031
132.45.2800.12   3021 2579 231 2955 2645 72 33 2855 2833 54 12 8×3 M10×1 18 3114 170 - - 160 0.5 2896 323 3010
130.50.3150 131.50.3150 133.50.3150 3432 2868 270 3342 2958 72 45 3213 3196 65 12 8×3 M10×1 20 3540 174 2760 139 180 0.5 3590 381 5000
132.50.3150 134.50.3150 3432 2868 270 3342 2958 72 45 [3104] [3081] 65 12 8×2 M10×1 22 3542 158 2750 126 180 0.5 3590 381 5000
130.50.3150.12K     3432 2868 270 3342 2958 72 45 3103 3086 50 12 8×2 M10×1               3735 502 4900
  131.30.3150.12K   3376 2922 182 3286 3014 56 45 3190 3180 40 10 8×3 M10×1 20 3476 171     120 0.5 2050 202 2308
  131.50.3150.12K   3432 2868 270 3342 2958 72 45 3214 3197 50 12 8×2 ZG1/4in 20 3540 174     180 0.5 3735 474 5404
  132.50.3150.12K   3432 2868 270 3342 2958 72 45 3214 3197 50 12 8×2 ZG1/4in 22 3542 158     180 0.5 3735 474 5409
  132.50.3150.12K1   3432 2868 270 3342 2958 72 45 3214 3197 50 12 8×3 M10×1 20 3536 174     195 0.5 3735 474 5385
    133.50.3150.11K 3432 2868 270 3342 2958 60 39 3103 3086 50 12 8×2 M10×1 20     2761 139 180 0.5 3575 501 5174
    133.50.3150.12K 3432 2868 270 3342 2958 60 39 3103 3086 50 12 8×2 M10×1 20     2761 139 180 0.5 3575 501 5174
    133.50.3150.12K1 3432 2868 270 3342 2958 60 39 3103 3086 50 12 8×2 M10×1 18     2754 154 180 0.5 3575 501 5174
    134.50.3150.11K 3432 2868 270 3342 2958 72 45 3103 3086 50 12 6×2 ZG1/4in 22     2754 126 180 0.5 3575 501 5104
130.50.3550 131.50.3550 133.50.3550 3832 3268 270 3742 3358 72 45 3613 3596 65 12 8×2 M10×1 20 3940 194 3160 159 180 0.5 4040 431 5600
132.50.3550 134.50.3550 3832 3268 270 3742 3358 72 45 [3504] [3487] 65 12 8×2 M10×1 22 3938 176 3146 144 180 0.5 4040 431 5600
132.50.3550.03K   3832 3268 270 3742 3358 72 45 3613 3596 65 12 8×3 M10×1 22 3934 176     180 0.5 4105 401 4960
132.50.3550.12   3832 3268 270 3742 3358 72 45 3613 3596 65 12 8×3 M10×1 22 3938 176     180 0.5 4105 401 5318
130.50.4000 131.50.4000 133.50.4000 4282 3718 270 4192 3908 80 45 4063 4046 65 12 8×2 M10×1 22 4400 197 3608 165 180 0.5 4560 487 6400
132.50.4000 134.50.4000 4282 3718 270 4192 3908 80 45 3954 3937 65 12 8×2 M10×1 25 4400 173 3600 145 180 0.5 4560 487 6400
131.50.4000.04K   4282 3718 270 4192 3908 80 45 4063 4046 65 12 8×2 M10×1 22 4400 197     180 0.5 4502 450 6377
132.50.4000.12   4282 3718 270 4192 3908 80 45 4063 4046 65 12 8×3 M10×1 25 4400 173     180 0.5 4502 450 6377
130.50.4500 131.50.4500 133.50.4500 4782 4218 270 4692 4308 80 45 4563 4546 65 12 8×2 M10×1 22 4906 220 4114 188 185 0.5 5445 580 6942
132.50.4500 134.50.4500 4782 4218 270 4692 4308 80 45 [4454] [4437] 65 12 8×2 M10×1 25 4906 193 4100 165 185 0.5 5445 580  
131.50.4500.04   4782 4218 270 4692 4308 80 45 4565 4546 60 12 8×3 M10×1 20 4880 242     185 0.5 4900 507 7250
132.50.4500.04   4782 4218 270 4692 4308 80 45 4565 4546 60 12 10×2 M14×1.5 25 4895 193     185 0.5 4900 506 7333
  131.60.5000.04   5320 4670 320 5220 4766 100 45 5082 5062 65 18 10×3 M10×1 20 5440 270     220 0.5 6834 955 11752

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now